What Are the Key Features of the Innolux AT070TN94?
Screen Size and Resolution Specifications
The Innolux AT070TN94 is a rad 7-inch TFT LCD display built for industrial and outdoor gigs. It rocks an 800×480 resolution for clear, sharp visuals. This works great for user interfaces, control panels, and monitoring systems. The active screen area is 154.08 × 85.92 mm. It gives plenty of space for key info without feeling cramped.
Brightness, Contrast Ratio, and Viewing Angles
This display pumps out 400 cd/m² brightness. It stays visible even in bright spots or direct sunlight. The contrast ratio is 500:1, making images pop with clear colors. Viewing angles are 70° up, 70° down, 50° right, and 70° left. This fits setups where folks check the screen from different spots.
Interface and Signal Input Options
The AT070TN94 uses an RGB/TTL interface for steady signal flow with low power use. It plays nice with tons of embedded systems and industrial controllers. It handles a voltage range from 3.3V to 16V, giving wiggle room for system setups.
How Does the AT070TN94 Perform in Industrial Environments?
Durability and Temperature Tolerance
The AT070TN94 is tough as nails. It works great from -30°C to +85°C. This wide temperature range means it can handle freezing cold or blazing heat without losing its cool.
Anti-Glare and Sunlight Readability Capabilities
With an anti-glare surface and 400 cd/m² brightness, this display stays readable under direct sunlight. It’s perfect for outdoor kiosks, farm gear screens, or construction equipment interfaces where light changes a lot.
Resistance to Vibration and Shock
Its sturdy build handles vibrations for logistics, factory automation, or HVAC controls. The slim 6mm profile adds strength when mounted on mobile or portable gear.
What Makes the Display Technology of AT070TN94 Stand Out?
TFT-LCD Panel Structure and Benefits
The display uses TN-based TFT-LCD tech. TN panels are budget-friendly and quick. This model steps up with better viewing angles and brightness than typical TN setups. It’s a Color TFT LCD panel with RGB interface support.
Color Accuracy and Visual Clarity
TN panels often lag behind IPS for color accuracy. But the AT070TN94 nails solid visual clarity with its high contrast ratio and bright levels. This ensures clear colors for industrial UIs or diagnostic screens.
Backlight System and Lifespan
The LED backlight system lasts 20,000 hours. This makes it great for long-term use in critical setups like transportation dashboards or automation terminals.
In Which Applications Can You Use the Innolux AT070TN94?
Industrial Control Panels
The AT070TN94 is made for tough conditions. It’s ideal for industrial control panels. Its wide temperature range, sturdy housing, and reliable signal interface make it perfect for nonstop factory or automation work.
Automotive Displays
For vehicle dashboards or infotainment units, this wide-temperature TFT display meets strict needs. Its sunlight readability boosts use in outdoor driving conditions.
Medical Equipment Interfaces
This model doesn’t come with touch features. But Miqidisplay offers customization with capacitive or resistive touchscreens and antibacterial glass. This fits medical devices where cleanliness is a big deal.
Portable Instrumentation Devices
The 6mm slim design slips easily into portable IoT devices like handheld analyzers or field-testing tools for engineering or environmental monitoring.
How Does the AT070TN94 Compare with Other 7-Inch LCD Modules?
Performance Benchmarks Against Similar Models
Compared to basic consumer-grade 7-inch displays with lower brightness (~250 cd/m²), the AT070TN94’s 400 cd/m² output shines in tough lighting. Many similar models don’t handle such wide temperature ranges.
Cost-Effectiveness and Value Proposition
With its mix of brightness, resolution, temperature tolerance, and long-life LED backlighting, the AT070TN94 is a sweet deal. It offers durability for OEMs without crazy costs. The RGB interface skips pricey driver boards needed for complex formats like LVDS or HDMI.
What Should You Consider When Integrating the AT070TN94 Into Your Project?
Compatibility with Embedded Systems
The RGB/TTL interface supports voltages from 3.3V to 16V. It works with platforms like ARM-based microcontrollers or FPGA-driven HMIs. Developers should double-check pinout alignment during PCB design.
Power Requirements and Signal Matching
The display runs on a flexible voltage range. But power sequencing during boot-up needs care. Signal integrity over long cables should use impedance-matched traces or shielded connectors, based on EMI sensitivity in the setup.
Mounting Options and Mechanical Design Considerations
Miqidisplay offers customization like cable tweaks and versatile mounting options. These let engineers fit the display into enclosures with gaskets, brackets, or pressure-sensitive adhesives (PSA). Optical bonding boosts durability against moisture, especially for outdoor setups.
Where Can You Source or Purchase the AT070TN94 Display Module?
Miqidisplay Custom Service for Innolux AT070TN94 Display
Miqidisplay is a trusted name in advanced display tech with over 20 years of global experience. They offer custom solutions for the Innolux AT070TN94, like connector tweaks, custom backlighting, and capacitive or resistive touchscreen add-ons. Optical bonding adds extra protection against moisture. Contact Miqidisplay.
Our strong industry partnerships allow us to offer prices 10%-20% lower than competitors, making us your go-to choice for cost-effective display solutions.
Products are stored in warehouses for zippy, accurate delivery—over 90% ship on time. Real-time tech support and a strict three-step quality check ensure top performance and reliability. For bulk orders or specialized setups, including custom touchscreen functions and screen connections, reach out to Miqidisplay’s sales team at mary@miqidisplay.com
sale@miqidisplay.com
support@miqidisplay.com. Let us help you meet your specific needs while saving on costs!