1.44″ LCD Arduino Module with SPI Interface & SD Slot

SKU: DS20204
Size

Resolution

Interface

Touchscreen Support

Board Support

Raspberry Pi

1.44″ LCD Arduino Module with 16-bit RGB, 128×128 resolution, 4-wire SPI interface & SD card slot. Ideal for embedded systems. Operates at -20°C~60°C.

x

    Description

    1.44″ LCD Arduino Module with SPI Interface & SD Slot

    Here are the key points about this 1.44″ LCD Arduino Module :

    ✅ 1.44″ IPS panel with 65K true-color depth
    ✅ Ultra-low latency SPI control
    ✅ Built-in SD card slot enables seamless data storage expansion, supporting firmware updates, image libraries, or log recording.
    ✅ Wide temperature range & anti-glare coating
    ✅ Compact PCB size: 31.49mm x 43.95mm

    1.44 inch Arduino SPI Module Key Parameters

    1.44 inch Arduino SPI Module Key Parameters
    Display Color 16BIT RGB 65K color if not controlled, connect 3.3V always bright
    Screen Size 1.44(inch) Module PCB Size 31.49×43.95 (mm)
    Type TFT Operating Temperature -20℃~60℃
    Driver IC ST7735S Storage Temperature -30℃~70℃
    Resolution 128*128 (Pixel) high level: register, low level: data
    Module Interface 4-wire SPI interface VCC power voltage 5V/3.3V
    Active Area (AA area) 26.2×27.2 (mm)

    1.44 inch Arduino SPI Module Interface

    1.44 inch Arduino SPI Module Interface
    PIN NO. SYMBOL DESCRIPTION PIN NO. SYMBOL DESCRIPTION
    1 VCC LCD Power positive (3.3V~5V) 7 CLK LCD SPI bus clock signal
    2 GND LCD Power ground 8 SDI LCD SPI bus write data signal
    3 GND LCD Power ground 9 RS LCD register / data selection signal,
    4 NC Not defined, reserved 10 RST LCD reset signal, low level reset
    5 NC Not defined, reserved 11 CS LCD chip select signal, low level enable
    6 LED Backlight control, high level lighting,

     

    Miqidisplay TFT LCD display provide vivid and full-color visual effects, capable of showing bright images, fast animations, complex graphics, custom fonts, as well as various touchscreen options . They support a variety of interface options, such as HDMI, SPI, LVDS, MIPI, RGB and EDP.

    These displays feature industry-standard sizes and resolutions . Multiple types are available, such as stretched bar and circular LCDs . Highly adaptable, Miqidisplay TFT modules suit diverse uses . Applications range from industrial control to medical equipment.

    Q: What is the size of the device?
    A: The size of the device is 1.44 inches.

    Q: What is the resolution of the device?
    A: The resolution of the device is 128*128.

    Q: What is the interface of the device?
    A: The interface of the device is SPI.

    Q: Does the device support a touchscreen?
    A: No, the device does not support a touchscreen.

    Q: Which board does the device support?
    A: The device supports the Raspberry Pi board.

    Additional information

    Size

    Resolution

    Interface

    Touchscreen Support

    Board Support

    Raspberry Pi

    Custom Display Solutions

    Work with our engineering experts to create the perfect display for your application.