描述
1.8″ TFT LCD Module Display | Arduino/STM32 Support
Here are the key points about this 1.8″ TFT LCD Module Display :
1.8-inch SPI LCD Module – a compact, high-resolution (128×160) display designed for seamless integration with Arduino, C51, STM32, and other embedded platforms.
✅ 128×160 RGB resolution with 18-bit color depth
✅ SPI interface (3-wire/4-wire modes) + built-in SD card slot
✅ Wide compatibility: Arduino Uno/Mega, STM32F1/F4, 8051 MCUs
✅ Ultra-low latency (<5ms response time)
✅ RoHS-certified, CE/FCC pre-tested
1.8 inch SPI Module Key Parameters
| 1.8 inch SPI Module Key Parameters | |||
| Display Color | RGB 65K color | Active Area (AA area) | 28.03×35.04(mm) |
| Размер экрана | 1.8(inch) | Module PCB Size | 34.5×58.0(mm) |
| Type | Тфу | Рабочая температура | -20 ℃ ~ 60 ℃ |
| Водитель ic | ST7735S | Температура хранения | -30 ℃ ~ 70 ℃ |
| Разрешение | 128*160 (Pixel) | VCC power voltage | 3.3В |
| Интерфейс модуля | 4-wire SPI interface | ||
1.8 inch SPI Module Interface
| 1.8 inch SPI Module Interface | |||||
| Булавка №. | Символ | ОПИСАНИЕ | Булавка №. | Символ | ОПИСАНИЕ |
| 1 | Перстю | LCD reset signal, low level reset | 5 | CLK | LCD SPI bus clock signal |
| 2 | CS | LCD chip select signal, low level enable | 6 | VCC | LCD Power positive (3.3V~5V) |
| 3 | D/C | LCD register / data selection signal, | 7 | BL | Backlight control, high level lighting, |
| 4 | DIN | LCD SPI bus write data signal | 8 | Гнездо | LCD Power ground |
Miqidisplay TFT LCD display provide vivid and full-color visual effects, capable of showing bright images, fast animations, complex graphics, custom fonts, as well as various touchscreen options . They support a variety of interface options, such as HDMI, SPI, LVDS, MIPI, RGB and EDP.
Эти дисплеи представляют собой стандартные отраслевые размеры и разрешения.
