描述
1.14″ SPI TFT Display Module – IPS 135×240 Resolution
Here are the key points about this 1.14 inch SPI TFT Display Module
✅ Industrial-grade operation (-20℃~60℃ extended range available)
✅ ST7789V driver IC with built-in GRAM (240x135x18-bit)
✅ 400cd/m² high brightness
✅ 3.3V/5V compatible logic interface
✅Preloaded Arduino/Raspberry Pi libraries
✅Certified with CE/RoHS/FCC standards
1.14inch IPS Module Key Parameters
| 1.14inch IPS Module Key Parameters | |||
| Display Color | RGB 65K color | Active Area (AA area) | 14.86×24.91 (mm) |
| 화면 크기 | 1.14(inch) | Module PCB Size | 30.40×28.00 (mm) |
| Type | ips | 작동 온도 | -20 ℃ ~ 60 ℃ |
| 드라이버 IC | ST7789V | 보관 온도 | -30 ℃ ~ 70 ℃ |
| 해상도 | 135*240 (Pixel) | VCC power voltage | 3.3V |
| 모듈 인터페이스 | 4-line SPI interface | ||
1.14inch IPS Module Interface
| 1.14inch IPS Module Interface | |||||
| 핀 번호. | 상징 | 설명 | 핀 번호. | 상징 | 설명 |
| 1 | Gnd | LCD Power ground | 5 | RES | LCD reset control signal(Low level reset) |
| 2 | VCC | LCD power supply is positive (3.3V) | 6 | DC | LCD register / data selection control signal |
| 3 | SCL | LCD SPI bus clock signal | 7 | CS | LCD chip select control signal (low level enable) |
| 4 | SDA | LCD SPI bus write data signal | 8 | BLK | LCD backlight control signal (high level lighting |
Miqidisplay TFT LCD display provide vivid and full-color visual effects, capable of showing bright images, fast animations, complex graphics, custom fonts, as well as various touchscreen options . They support a variety of interface options, such as HDMI, SPI, LVDS, MIPI, RGB and EDP.
이 디스플레이는 업계 표준 크기 및 해상도를 특징으로합니다.
