Descrizione
1.69″ SPI LCD Arduino TFT Display | SPI Interface
Here are the key points about this 1.69″ SPI LCD Arduino TFT Display
1.69 inch IPS TFT Display Module engineered for embedded systems. Featuring a crisp 240×280 resolution with 65K RGB color reproduction, this display delivers 170° wide viewing angles through advanced IPS technology.
✅ Ultra-compact 4-wire SPI interface minimizes GPIO usage
✅ Plug-and-play compatibility with STM32/C51/MSP430 platforms
✅ Robust performance across -10℃ to 60℃ environments
✅ Anti-glare surface treatment for outdoor readability
✅ <15ms response time for dynamic content display
1.69 inch IPS SPI Module Key Parameters
| 1.69 inch IPS SPI Module Key Parameters | |||
| Display Color | RGB 65K color | Active Area (AA area) | 27.972×32.634 (mm) |
| Dimensione dello schermo | 1.69(inch) | Module PCB Size | 31.00×48.00(mm) |
| Tipo | IPS | Temperatura di esercizio | -10℃~60℃ |
| Driver IC | ST7789 | Temperatura di stoccaggio | -20 ℃ ~ 70 ℃ |
| Risoluzione | 240*280 (Pixel) | VCC power voltage | 3.3V |
| Interfaccia del modulo | 4-line SPI interface | ||
1.69 inch IPS SPI Module Interface
| 1.69 inch IPS SPI Module Interface | |||||
| PIN NO. | SIMBOLO | DESCRIZIONE | PIN NO. | SIMBOLO | DESCRIZIONE |
| 1 | GND | LCD Power ground | 5 | RES | LCD reset control signal(Low level reset) |
| 2 | VCC | LCD power supply is positive (3.3V) | 6 | DC | LCD register / data selection control signal |
| 3 | SCL | LCD SPI bus clock signal | 7 | CS | LCD chip select control signal (low level enable) |
| 4 | SDA | LCD SPI bus write data signal | 8 | BLK | LCD backlight control signal (high level lighting, |
Display LCD TFT Miqidisplay forniscono effetti visivi vividi e a colori, in grado di mostrare immagini luminose, animazioni veloci, grafica complessa, caratteri personalizzati e varie opzioni touchscreen. Supportano diverse opzioni di interfaccia, come HDMI, SPI, LVDS, MIPI, RGB e EDP.
Questi display presentano dimensioni e risoluzioni standard del settore.
