Descrizione
1.8″ TFT LCD SPI TFT Display –16-bit RGB 65K Colors
Here are the key points about this 1.8″ TFT LCD SPI TFT Display
SPI LCD Module – a high-performance display solution designed for seamless integration and versatile applications.
✅ SPI Serial Interface: Requires only 4-6 I/O pins, reducing wiring complexity and saving MCU resources.
✅ SD Card Slot: Expand storage capacity for fonts, images, and data logging, enabling rapid prototyping.
✅ Wide Temperature Range: Stable operation from -20℃ to 60℃, suitable for industrial and outdoor environments.
✅ Low Power Design: Optimized for battery-powered devices like portable instruments and IoT gadgets.
1.8 inch SPI Module ST7735S Key Parameters
| 1.8 inch SPI Module ST7735S Key Parameters | |||
| Display Color | RGB 65K color | Active Area (AA area) | 28.03×35.04(mm) |
| Dimensione dello schermo | 1.8(inch) | Module PCB Size | 34.5×58.0(mm) |
| Tipo | Tft | Temperatura di esercizio | -20 ℃ ~ 60 ℃ |
| Driver IC | ST7735S | Temperatura di stoccaggio | -30 ℃ ~ 70 ℃ |
| Risoluzione | 128*160 (Pixel) | VCC power voltage | 3.3V |
| Interfaccia del modulo | 4-wire SPI interface | ||
1.8 inch SPI Module ST7735S Interface
| 1.8 inch SPI Module ST7735S Interface | ||||||
| PIN NO. | SIMBOLO | DESCRIZIONE | PIN NO. | SIMBOLO | DESCRIZIONE | |
| 1 |
|
5V/3.3V power input | 5 | A0 | LCD register / data selection signal,high level: register, low level: data | |
| 2 |
|
Terra | 6 | SDA | SPI bus write data signal | |
| 3 | CS | LCD chip select signal, low level enable | 7 | SCK | SPI bus clock signal | |
| 4 | RESET | LCD reset signal, low level reset | 8 | GUIDATO | Backlight control, high level lighting | |
Display LCD TFT Miqidisplay forniscono effetti visivi vividi e a colori, in grado di mostrare immagini luminose, animazioni veloci, grafica complessa, caratteri personalizzati e varie opzioni touchscreen. Supportano diverse opzioni di interfaccia, come HDMI, SPI, LVDS, MIPI, RGB e EDP.
Questi display presentano dimensioni e risoluzioni standard del settore.
